Vongon – Onset

Description

ONSET is an auto volume swell effect with rise times ranging from \ 00 milliseconds to 2 seconds. Two sliders are used to control the detection circuit’s sensitivity and the volume fade length. The LEDs indicate the status of the volume swell. smoothly fading from purple to yellow. The signal path is an all-analog high fidelity VCA (voltage controlled amplifier) that is controlled by a digitally generated exponential envelope for the volume swell. When bypassed. a mechanical relay-based true bypass circuit is activated by the soft-touch foot switch.

Specifications:

1/4″ mono jacks
Input impedance: 1 kI0
Output impedance: \ kf2
2.1 mm DC Connector
9VDC center negalive power
Current Draw: 100mA
Soft-touch foot switch
True bypass

Power:

ONSET was designed to operate using your typical center negative. regulated 9-9.é VDC power supply. The pedal is protected against reversed polarity and overvoltage conditions. Always check your power supply for proper voltage and polarity before connecting. There is no battery connection inside the pedal.